MortarMaster VSE 500
MORTAR MASTER VSE 500
Ideal choice for the mixing and conveying of materials, even dry types which cannot be pumped by discharged pumps. The VSE500 has proven itself to be the most time and cost saving machinery that replaces crane transport and reduce manpower in the handling of:
- Floor Screed
- Chipping concrete
- Sand (wet/dry)
Technical Data:
| Electrical Motor(kW): 18.5 | Dimension: (LxWxH) 2600 x 1300 x 1250 |
| Conveying Distance(m): 200* | Weight(kg) 1125 |
| Conveying Height (m): 150* | Conveying capacity: (m3/hour) 8* |
| Compressor Volume (Req.): 185-375 | Maximum Grain Size: (mm) 10* |
| Compressor Pressure (Bar): 7 | |
Ideal when access to work site is difficult:
The VSE 500 is most suitable for mixing and pumping materials to difficult to reach locations. Reduces workers load and time needed for material transportation. The VSE 500 can help to increase job site efficiency by more than 100%.
Best of Both Worlds: Mix & Pump
Built in mixer ensures well mixing of the materials before pneumatically pumping the materials to its intended destination.
How It Works:
1 · Operators input required materials into the VSE500. Single shift shaft mixer gives material a good mix -vertical
2 · The mixed materials can be delivered through the conveying line to its intended destination or horizontal.
3 · The materials will be conveyed to the desired designation without any hassle.
Basic technical data:
| Pressure vessel volume | 500 liters |
| Technical output | 10 m3 /h |
| Grain size | max. 32mm |
| Transport distance | horizontally 100 m; vertically 40 m |
| Electric motor power | 18 kW |
| Working overpressure into wessel | 0,8 MPa |
| Voltage system | AC Three Phase 400V, 50Hz |
Dimensions :
| Length | 3680mm |
| Width | 1300mm |
| Height | 1300mm |
| Weight | 1125mm |
Air Source Requirements:
| Technical output | 360 m3/h |
| Nominal overpressure | 0,8 MPa (8 bar) |
**Technical Specification Subject to changes without prior notice.
Series B
- These rugged pumps feature “open-Loop” hydraulic systems and variable displacement hydraulic pumps.
- All B Series Pumps now feature Cuummins Diesel Engines that are more Powerful(more torque),quieter, and more efficient(lower RPMs) and EPA Tier 3 approval (119 or 130 hp(82 or 97kW).
- The simple design of the B Series pumps makes them easy to trouble shoot and service.
- A variety of output and pressure ranges makes the B Series top performers for any application
Standard Features:
- REED PLC ( Programmable Logic Controller) allows for self diagnosis on the LCD, simple adjustments and future enhancements
- Variable-volume and R.P.M. control at remote control box
- Adjustable shifting force valve
- Heavy-duty “S” Valve
- Chromed concrete cylinders for long service life
- High-strength frame design ( sturdiest frame in industry)
- Integrated toolbox
- Highest commonality of hydraulic hoses
Applications:
- Shotcrete
- Concrete Pumping
- Pressure Grouting
- Foundations
- Slope Stabilization
- Pools
- Refractory Materials
- Slabs
- Rockscaping
- Mines
- Backfill
- Flowable fill
Series C
- REED C Series pumps feature Rexroth “Closed-Loop” hydraulic systems, twin axles and twin-shift cylinders. These high performance pumps excel even under extreme conditions. REED is the first trailer pump manufacturer to bring this top level Boom Pump technology to trailer pumps.
- The rugged, powerful C Series pumps are designed to withstand the punishment inherent to heavy construction environments.
- Superior engineering, premium technology, top quality components and pride in workmanship make C Series pumps the most reliable pumps on the market.
Standard Features:
- Rexroth Closed-loop, over center hydraulic system
- Cummins Diesel Engines are powerful ( more torque), quieter, and more Efficient(lower RPMs). EPA Tier 3 approval.
- REED PLC (Programmable Logic Controller) Allows for self diagnosis on the LCD, simple adjustments, and future enhancements
- Variable- volume and R.P.M. control at remote control box
- Strongest Shifting Cylinder Force on the market
- Carbide Wear Parts
- Hydraulic Outriggers
- Super heavy-duty frame(Sturdiest frame on market)
- Twin axle trailer 2×7000 lb( x-3182kg)
- 3″ Splined shaft on heavy duty “S”-tube
- 42″ stroke length
- Special high-pressure reinforced hopper
T Series
Truck mounted concrete pumps are based on our A, B & C Series concrete pumps. They are powered by the pump’s own diesel engine. T Series pumps can be mounted on a wide variety of readily available truck chassis.
T series:
- T Series pumps are based on REED’s rugged and reliable A, B and C Series line pumps. The pump cell is either factory-mounted on a customer-supplied truck , or shiped to the customer on a custom skid for the customer to mount.
- T Series pumps are typically powered by a seperate diesel engine which translates to fuel savings over PTO driven pumps.In addition, because the pu,p cell is separate from the truck’s electrical system, they are easy to trouble-shoot and service. (PTO power is available upon request)
- T Series pumps can be mounted on a wide variety of readily available truck chassis.
Standard Features:
- Full aluminium decks with sake side panels, steps on both sides
- Engine toe-kicks, fully structural hood, tool box
- Two-colour custom paint
- Variable displacement hydraulic pumps
- Heavy-duty “S” valves
- Chromed concrete cylinders
- Forged steel pistons with urethane cups
- Hour meter/tachometer
- Weatherproof NEMA 4 control panel
- High commondality of hydraulic hoses
Applications:
- Shotcrete
- Concrete Pumping
- Slope Stabilisation
- High Rises
- Walls & Foundations
Advantages:
- Better Jobsite maneuverability
- Fuel savings
- Fully self-contained unit
- Easy to troubleshoot
PT Series
Truck mounted concrete pumps are powered by the truck’s engine via Power-take-off (PTO). PT Series pumps can be mounted on a wide variety of readily available truck chassis.
PT Series:
- T Series truck mounted concrete pumps are Power-take-off (PTO) powered from truck engine.
- PT Series pumps are preferred for the most difficult to access jobsites.
- These rugged pumps feature “Closed-Loop” hydraulic systems.
- The simple,clean design of the PT Series pumps makes them easy to operate and service.
- PT Series pumps can be mounted on a wide variety of readily available truck chassis
Standard Features:
- Rexroth Hydromatik variable displacement piston pump (A4VG125)
- Heavy duty “S” Valve
- Chromed concrete cylinders for long service life
- Tool Box, and stake Side Bed
- Full length side decks
- Full length side decks
- High capacity hydraulic oil cooler
- 5-function remote control with 50′(15m) cable
- Fully enclosed weather-proof control panel
- 2 c0lour paint scheme
- Engine toe kicks
Applications
- Concrete pumping
- Shotcrete
- Pressure Grouting
- Slope Stablization
- Pools
- Foundations
Advantages:
- Better Jobsite maneuverability
- Fully self-contained unit
- non-CDL level truck.
- Long Life, Heavy-Duty Truck Chassis
Bơm mini
- Extremely compact size,, makes it ideal for underground applications or any application with limited space. The Mine 30 can be powered by an electric, diesel, or air motor. (96″x46.5″x64.7″)
- The Mine 30 is suitable for cross mounting on a truck or other carrier. Fork channels on the side and end also come standard.
- The Mine 30 can be powered by diesel or air motor.
- The simple design of the Mine 30 makes it easy to trouble-shpt and service. It provides strong performance, extreme dependability and long life of all wear parts.
Standard Features:
- Heavy-duty “S” Valve
- “Open-Loop” hydraulic system and a variable displacement hydraulic pump
- Adjustable shifting force valve
- Chromed concrete cylinders for long service life
- High-strength frame design(Studiest frame in industry)
- Highest commonality of hydraulic hoses
Applications:
- Shotcrete
- Concrete Pumping
- Grouting
- Backfill
- Mine & Tunnel Support
- Flowable fill
- Specialty Materials
